Golfat (HONG KONG) CO.,LIMITED. Golfat (HONG KONG) CO.,LIMITED.
Engineering Plastis Provider
Engineering Plastis Provider
Home > Product > Engineering Plastics
Products of the GOLFAT, listed by product name and by company name.
manufacturerBrandSeriesGradeFeaturesData sheet
INVISTATORZEN™

   PA66

 Compounding 

 Feedstock

U4800Low hygroscopicity compounding feedstock
U4801Compounding feedstock
U4803Additives-free compounding feedstock
U3501High flow compounding feedstock
U4501Amine end groups controled compounding feedstock
U5101Compounding feedstock

  PA66

 Unfilled

U4830HSLHeat stabilized,lubricated
U4630HSLHeat stabilized,lubricated
U4632HSLHeat stabilized,lubricated
U4820LFast cycle,lubricated
U4850LLubricated,anti-UV
U4640NLHighly nucleated,fast cycle,lubricated
U4664FLModerately nucleated,fast cycle,lubricated

PA66  

Toughened

T2000HSL(HS1L)Medium toughening,high flow,heat stabilized
T3000HSL(HS1L)Superior toughening,good flow,chemical resistance
PA66
GF-filled
G2500HSL(HS1L)25% GF reinforced,heat stabilized
G3000HR30% GF reinforced,hydrolysis resistant
G3000HSL(HS1L)30% GF reinforced,heat stabilized
G3300HSL(HS1L)33% GF reinforced,impact resistance
G3500HSL(HS1L)35% GF reinforced,impact resistance
G5000HSL50% GF reinforced,heat stabilized,good scale stability
PA66
M-filled
M1500HSL15% mineral reinforced,heat stabilized,lubricated
M3000HSL30% mineral reinforced,heat stabilized,lubricated
PA66
GF/M-filled
GM1500HSL15% GF reinforced,mineral reinforced,heat stabilized,good scale stability
GM3800HSL38% GF reinforced,mineral reinforced,heat stabilized,good scale stability

PA66 

Flame Retarded

FRG1500XHL15% GF reinforced,mineral reinforced,heat stabilized,good scale stability
FRG1510XHL15% GF reinforced,FR Halogen free,heat stabilized
FRG2500XHL25% GF reinforced,flame retardant,heat stabilized
FRU4800XHLFlame retardant,plasticized,non-heavy metal of bromine,phosphorous
TORZEN Marathon™PA66
Marathon
G3000XHL30% GF reinforcedHeat stabilized,Keep remarkably improve of performance under  sustained high temperature,and higher flow,lower hygroscopicity than general PA66
G3500XHL35% GF reinforced
G4000XHL40% GF reinforced
G5000XHL50% GF reinforced
BASFUltramid®PA66
Unfilled
A3KEasy to flow,fast injection grade,FDA certified
A3WHeat aging resisitance,injection grade
PA66
GF-filled
A3EG3(G6/G7)15%(30%/35%) GF reinforced,injection grade,FDA and NSF certified
A3EG5(G10)25%(50%) GF reinforced,injection grade
A3HG5(G6)25%(30%) GF reinforced,injection grade
A3WG3 (G5/G6/G7)15%(25%/30%/35%) GF reinforced,injection grade,good electrical insulation
PA66
GF/M-filled
A3WGM5325% GF reinforced,15% mineral reinforced,injection grade
PA66
GF-filled, Flame Retarded
A3X2G525% GF reinforced,red phosphorus flame retardant,good long-term stability, excellent mechanical and electrical properties
A3X2G735% GF reinforced,red phosphorus flame retardant,good long-term stability, excellent mechanical and electrical properties
A3UG525% GF reinforced,halogen & phosphorus free flame retardant.Excellent mechanical and electrical properties
PA66
Toughened
A3LToughened,heat aging,easy flow
A3ZToughened,good impact in low temperature
A3ZG3(G6)25%(30%) GF reinforced and toughened,dimensional stability
PA6
Unfilled
B3SEasy flow,good crystallization,fast cycle
B3LImpact modified injection grade,easy processing
PA6
GF-filled
B3EG5(G7)25%(35%) GF reinforced,high rigidity,high dimensional stability,heat aging resistance
B3EG630% GF reinforced,high rigidity,high dimensional stability,heat aging resistance,NSF certified
B3WG3(G6/G7)15% (30%/35%) GF reinforced,injection grade,good electric insulation
B3ZG6(G7)30% (35%) GF reinforced,injection grade,impact modified
PA6
M-filled
B3M630% mineral reinforced,low warpage,high surface gloss,can be chemical plated

PA6

M/GF-filled

B3WGM2410% GF reinfored,20% mineral reinforced,injection grade
B3WGM3515% GF reinfored, 25% mineral reinforced,injection grade
PA6
GF-filled, Flame Retarded
B3U30G420% GF reinforced,halogen and phosphorus free flame retardant.Excellent mechanical and electrical properties
PA6
Flame Retarded
C3UHalogen and phosphorus free flame retardant,injection grade
Ultramid® T

PA6/6T

高温尼龙

KR 4350High melting point,low extrusion bibulous rate
KR 4355 G5(G7)25%(35%) GF reinforced,injection grade,low water absorption,high melting point
KR 4365 G525% GF reinforced,injection grade,low bibulous rate,red phosphorus flame retardant system with  high melting point,high arc trace diameter index,low contact precipitation rate,low electrochemical corrosion,welding groove resistance,electroplating processing
GOLFATGOLFAT®

PA66

Unfilled

A1U2700LInjection grade,unreinforced
A1U2730LInjection grade,heat resistance
A1U2740LNucleated,lubricated,fast cycle
PA66
GF-filled

A1G1000 (1300/1500/2000

/3000/3300/4300/5000)L

10%(13%/15%/20%/30%/33%/43%/50%)GF reinforced
A1G3000HR30% GF reinforced,hydrolysis resistant
PA66
Surface Modified
GF-filled
A1G1500SL30% GF reinforced,surface modified,for high requirement in surface effect applications

A1G3000 

(3300/4000/5000/6000)HSL

30%(33%/40%/50%/60%) GF reinforced,high temperature resistance,surface modified,for high requirement of surface effect applications
PA66
Heat Retarded

A1G1500 

(3300/4300/5000/6000)HL

15%(33%/43%/50%/60%) GF reinforced,high temperature resistance
PA66
Carbon Fiber Filled
A1C1000(2000)L10%(20%) carbon fiber reinforced
A1C3000(4000/5000)L30%(40%/50%) carbon fiber reinforced,for mechanical parts with high strength
PA66
Wear Resistant

A1T0500

(1000/1500/2000)L

5%(10%/15%/20%)PTFE
PA66
Carbon Fiber Filled and Wear Resistant

A1CT1005

(1010/1015/1020)L

10% CF reinforced and 5%(10%/15%/20%)PTFE,antistatic,high strength,abrasion resistance

A1CT2005

(2010/2015/2020)L

20% CF reinforced and 5%(10%/15%/20%)PTFE,antistatic,high strength,abrasion resistance
PA66
Glass Fiber Filled and Wear Resistant

A1GT1505

(1510/1515/1520)L

15% GF reinforced and 5%(10%/15%/20%)PTFE,for electronic,mechanical and other consumer parts in high requirement of lubrication

A1GT3005 

(3010/3015/3020)L

30% GF reinforced and 5%(10%/15%/20%)PTFE,for electronic,mechanical and other consumer parts in high requirement of lubrication
PA66
Mineral Filled

A1M1000

(2000/3000/4000)L

10%(20%/30%/40%) mineral reinforced,for exterior parts in electroplating appearance
PA66
Toughened
A1Z2000LMedium toughening,good impact modified
A1Z3000LSuperior toughening,excellent impact modified,for exercise equipments like ice skates, bassinets, and furniture fittings
PA66
Toughened and Glass Filled
A1GZ1530(3330)HL15%(30%) GF reinforced, impact modified,high strength,high temperature resistance,for mechanical,auto parts
A1GZ1520(3020)HL15%(30%)GF reinforced,impact modified, for mountain bike accessories,fitness equipments and etc.
PA66
Toughened and Mineral Filled

A1MZ1020

(2020/3020/4020)CR

10%(20%/30%/40%) mineral reinforced,impact modified,for exterior parts used in low temperature
PA66
MoS2 Filled

A1MS0200

(0500/0900)L

2%(5%/9%) MoS2 filled,good lubrication,for low abrasion applications like bearing ferrule,household appliance shell,and panel gear with high quality in painting or small deformational parts
PA66
Stainless steel fiber Filled

A1ST0500

(1000/1500/2000)L

5%(10%/15%/20%)stainless steel fiber reinforced,for shield engineering parts
PA66
Flame Retarded
A1U2700X3LHalogen free flame retardant,unreinforced
A1U2700X3HLHalogen free flame retardant,unreinforced,high temperature resistance

A1G1500

(2500/3000)X2L

Halogen flame retardant,15%(25%/30%) GF reinforced

A1G1500(2000/2500

/3000/3500)X3L

Halogen free flame retardant,15%(25%/30%/35%) GF reinforced

A1G2000 

(2500/3000/3500)X3L

Halogen free flame retardant,20%(25%/30%/35%) GF reinforced
A1G2500X1LRed phosphorus flame retardant,25% GF reinforced
PA66
Long GF-filled

A1LG4000

(5000/6000)L

Good stiffness and strength in high temperature,excellent impact strength in low temperature, higher energy absorption and better crashworthiness than general short glass fiber reinforced PA.Advantages in the parts: higher distortion temperature,lower warpage,good dimentional stability and excellent surface quality
GOLFATGOLFAT®PA6
GF-filled

A2G1500

(3300/4500)L

15%(33%/45%) GF reinforced
PA6
Flame Retarded
A2U2700X3LHalogen free flame retardant,for terminal blocks and connectors

A2G1500(2500/3000

/3500/4000/4500)X2L

Halogen flame retardant,15%(25%/30%)glass fiber reinforced

A2G1500 (2000/2500

/3000/3500)X3L

Halogen free flame retardant,15%(25%/30%)glass fiber reinforced
A2G3500X3LHalogen free flame retardant,35% glass fiber reinforced
PA6
High Modulus
A2G6300SLBalanced high strength and impact resistance, good surface quality and good dimensional stability, high initial modulus, chemical resistance, low water absorption, low creep tendency, easy processing, a wide range in processing temperature .Suitable for alternative metal, parts, auto exterior parts, industrial support, sports equipment, meter, furniture etc
PA6
Toughened
A2Z2000LToughening,good impact performance
A2GZ1520(3020)CRLToughening,15%(25%/30%)glass fiber reinforced,good impact performance in low temperature
PA6
Glass bead Filled

A2B1000 (1500/2000/2500

/3000/3500/4000)L

10%(15%/20%/25%/30%/35%/40%)glass bead reinforced,dimension stabilized,high strength

PA6

Carbon Fiber Filled

A2C0500(1000/1500

/2000/2500)L

5%(10%/15%/20%/25%)carbon fiber reinforced,antistatic,high strength
PA6
Glass fiber and Glass bead Filled

A2GB250

0(4000/4500)L

25%(40%/45%)glass fiber and glass bead reinforced,for precision parts with dimensional stability
PA6
Long GF-filled

A2LG4000

(5000)CR

Good stiffness and strength in high temperature, excellent impact strength in low temperature, higher energy absorption and better crashworthiness than general short glass fiber reinforced PA. Advantages in the parts: higher distortion temperature, lower warpage, good dimentional stability and excellent surface quality
Special Nylon PA (Special Polyamide)
GOLFATGOLFAT®PA610

A5G3000

(3500)L

Lower water absorption than PA6 or PA66,excellent hydrolysis resistance and stress cracking hydrolysis resistance.For injection moulding applications in metal box with electronic parts in corrosive environment,like wheel speed sensors, shell or gear parts in high dimension stabilized requirement,or plug connectors,pipelines and water tanks in  high hydrolysis resistance requirement
A5G3000LEI
A5U2700L
OA1A5G3000LPA66/610 alloy, 30% GF reinforced,for oil pans and oil-filter shells,radiator end cap,parts contcat with corrosive sprayer.
高温尼龙玻纤增强型Glass Fiber FilledA4G1500 (2000/3000/4000)L15%(20%/30%/40%)glass bead reinforced,for computer fittings or other precision parts in high temperature resistance and high strength
高温尼龙碳纤增强型Carbon Fiber FilledA4C1000 (2000/3000/4000)L10%(20%/30%/40%)carbon fiber reinforced,antistatic,high strength
高温尼龙耐磨型    Wear ResistantA4T0500 (1000/1500/2000)L5%(10%/15%/20%)PTFE,for high abrasion parts in high temperature environment
高温尼龙耐磨增强型Glass Fiber Filled and Wear ResistantA4GT1505 (1510/1515/1520)L15% GF reinforced and 5%(10%/15%/20%)PTFE,for high abrasion parts in high temperature environment
A4GT3005 (3010/3015/3020)L30% GF reinforced and 5%(10%/15%/20%)PTFE,for high abrasion parts in high temperature environment

挤管尼龙   

Extrusion for pipe

AU3300EXLextrusion grade, high toughness, excellent filling properties, good chemical resistance,
       high melt strength and enhance the thermal stability of the transfer of plasticizer, apply
       to squeeze tube, single or multi-layer spray hose, easy processing, sustainable and long
     time use
AU3500EXLSpecial extrusion grade, high toughness, excellent filling properties, good chemical resistance, high melt strength and enhance the thermal stability, easy processing is suitable for the crowded tube, under the high temperature used in the acid environment of multiple layers of oil/gas pipeline
AU3700EXLhigh toughness, excellent filling properties, good chemical resistance, high melt strength
       and enhance the thermal stability, easy processing with the transfer of plasticizer, apply
     to squeeze tube, single or multi-layer freeze, spray paint, hydraulic and drain hose
AU3800EXLSpecial extrusion grade, high toughness, excellent filling properties, good chemical resistance, high melt strength and enhance the thermal stability, easy processing with the transfer of plasticizer, apply to squeeze tube, corrugated tube
共聚尼龙 CopolymerizationASF1000Injection grade, improve the bonding performance with metal, compensation for thermal expansion coefficient of different materials, mainly used for electronic control devices such as brake system, air bag control unit and transmission control device, control unit, door control unit

导热、导电型

Thermal/electrical  conductive

A3U3000TEThermal and electrical conductive PA6/6
A3U2700TEIThermal conductive and insulational PA6/6
A3U5000TEThermal and electrical conductive PA6/6
A2U4500TEThermal and electrical conductive PA6
A6U6000TEThermal and electrical conductive PA12
A6U6000TEIThermal conductive and insulational PA12
A6U6000TECThermal and electrical conductive PA12
A6U7500TEThermal and electrical conductive PA12
POLYRAMPlusTekPA66PA100Unfilled,FDA certification
PA301G630% GF reinforced
PA340S630% GB reinforced
PA860Super tough
PA3005J420% GF&GB reinforced
PA7001G735% GF reinforced,burst toughened,UV stabilized,NSF certification
PA6PB145Unfilled
PB300G630% GF reinforced
PB340S630% GB reinforced
PB845Impact modified
PB826G315% GF reinforced,impact modified
PB507Flame retardant
SOLVAYTechnyl®

PA6

6Unreinforced

A 205FUnreinforced,high fluidity,fast cycling.Particularly suitable for long parts with thin wall sections,such as cable ties,fasteners or connectors
A 216Unreinforced,medium viscosity.Offers all of the primary properties of unreinforced polyamide 66, such as thermal and mechanical properties, impact resistance,abrasion and chemical resistance
A 218Unfilled,heat stabilized, standard viscosity.Improved resistance to high temperature, For Automotive industry:diagnostic plugs,connectors...Electrical industry: housings, connectors,cable ties...
A 221Unreinforced,medium viscosity,special crystallizing agent,for fast cycles.For automotive: connectors,electrical:connectors,rotary switches; consumer goods: lighters,aerosol valves

PA66 

Reinforced

2411GF630% GF reinforced,excellent thermal stability and mechanical properties
A 216 V3030% GF reinforced.Excellent thermal and mechanical properties
A 216T V3333% GF reinforced,heat stabilised.Excellent thermal and mechanical properties. Specially designed for laser marking
2412GHF840% GF reinforced,heat stabilized .Excellent thermal stability and mechanical properties.For automotive parts
2412GM05-D38% GF&M mineral reinforced.Good mechanical strength,low warpage,good surface aspect & heat resistance
A 216 S3030% GB reinforced.Excellent thermal and mechanical properties.Good surface finish with low warpage,and good compression strength
A 218 MZ15Low warpage,25% GF and 15%M reinforced,heat stabilized.For automotive industry to mould large parts

A 218 V25

(V30/V35/V40/V50)

25%(30%/35%/40%/50%) GF reinforced,heat stabilized.Excellent thermal and mechanical properties.Commonly used in the automotive industry
A 218G V3333% GF reinforced,automotive cooling liquids resistance

A 218HP V35

(V50)

35%(50%) GF reinforced.Outstanding long term heat resistance :long term stability up to 190°C.Commonly used in the automotive for engine components
A 218W V3030% GF reinforced,heat stabilized,hydrolysis resistance.For mechanical components in permanent or intermittent contact with hot water
PA66
Toughened
2710IRImpact modified,fast cycle time
2710STImpact modified,very high impact resistance even at low temperature.For Sports and leisure applications,toy applications,battery gasket

PA66

Flame retardant

A 20 V25

(V35)

Halogen free(red phosphorous) flame retardant,25%(35%) GF reinforced.For moulding insulating parts for electrical devices:connectors,switches,bobbins coil formers,thin parts under stress
A 30G1Halogen (RoHs Compliant) flame retardant,unreinforced,heat stabilised,excellent impact and strain properties.Suitable for moulding electrical components
A 50H1Halogen and red phosphorus free flamefree flame retardant,unreinforced heat stabilised, suitable for electrical components:junction blocks,terminal blocks,connectors
SOLVAYTechnyl®

PA6

Unreinforced

1011RUnreinforced,lubricated.For fastener,clip,gear,bobbin,hand mixer cover
C 216Unreinforced,standard nucleation for fast cycling,high fluidity and good mould release.Suitable for the production of technical mouldings with fast injection cycles
PA6
Reinforced
C 548B V1515% GF reinforced,heat stabilised,very high viscosity for blow-moulding.Mainly in the oil and air circuits,such as air intake ducts, turbo to intercooler pipe or intercooler exit duct
1021GF630% GF reinforced.For automotive industry and electrical sectors
C 216 V3030% GF reinforced,good thermal and mechanical properties
C 218 V3030% GF reinforced,excelent mechanical and thermal resistance with good impact resistance and dimensional stability
C 246 V3030% GF reinforced,crash resistant, high impact strength,very good mechanical properties
PA6
Toughened
1021STSuper tough impact modified. For Bowling Pin, Brake Drum or Inline Skate parts
B 230PCopolyamide 66/6,impact modified,high flexibility and improved impact resistance,for applications where good impact resistance at low and room temperature is required, commonly used in:automotive: bumpers and clips;sports and leisure: sports bag buckles; electrical appliance:cable ties

PA6

Flame retardant

C 50H2Halogen free (melamine cyanurate) flame retardant,unreinforced,heat stabilized, suitable for moulding insulating parts for electrical components: junction blocks, terminal blocks, terminal connectors
B 50H1Copolyamide 66/6,halogen free (melamine cyanurate) flame retardant,unreinforced, heat stabilised, high ductility at low temperature
C 30H1 V3030% GF reinforced,halogen (RoHs Compliant) flame,suitable for pieces such as: switches, timers, etc.
B 52G1 MX35Copolyamide 66/6,halogen and red phosphorus free flame retardant,35% mineral reinforced,excellent glow wire resistance,good thermal and dimensional stability used for several applications including breaker

Add: Rm 205, Jiayuan Industrial Park, No. 728 Kaichuang Ave., Huangpu Dist., 510715, Guangzhou, Guangdong Province, China

Mobile: +86 139 2885 9130

Tel: +86 20 3202 6161

Fax: +86 20 3202 6169

E-mail: ryan.zeng@gdgolfat.com

Technical Support:
Technical Support:
Copyright © Golfat (HONG KONG) CO.,LIMITED.
All Rights Reserved. Sitemap
Top